Share:


TLP109(TPL,E

Specifications

SKU: 11592627

BUY TLP109(TPL,E https://www.utsource.net/itm/p/11592627.html

Parameter Symbol Min Typ Max Unit Conditions
Forward Voltage VF - 1.2 1.8 V IF = 20 mA, TA = 25°C
Reverse Breakdown Voltage VBR 5 - 7 V IR = 10 μA, TA = 25°C
Output Collector-Emitter Saturation Voltage VCE(sat) - 0.3 0.5 V IC = 5 mA, IF = 20 mA, TA = 25°C
Output Collector Current IC - 5 15 mA VCE = 5 V, IF = 20 mA, TA = 25°C
Input Current IF - 20 30 mA VF = 1.5 V, TA = 25°C
Isolation Voltage VI - - 5000 Vrms 1 min, 50/60 Hz
Storage Temperature Range TSTG -40 - 110 °C -
Operating Temperature Range TA -40 - 105 °C -

Instructions for Use:

  1. Mounting:

    • Ensure the device is mounted on a suitable PCB with proper heat dissipation.
    • Avoid mechanical stress on the leads during soldering.
  2. Soldering:

    • Soldering temperature should not exceed 260°C.
    • Soldering time should be kept to a minimum (less than 10 seconds).
  3. Electrical Connections:

    • Connect the anode (A) and cathode (K) to the input side.
    • Connect the collector (C) and emitter (E) to the output side.
    • Ensure correct polarity to avoid damage.
  4. Operating Conditions:

    • Do not exceed the maximum ratings listed in the table.
    • Operate within the specified temperature ranges to ensure reliable performance.
  5. Handling:

    • Handle the device with care to avoid static discharge.
    • Use appropriate ESD protection measures.
  6. Testing:

    • Test the device under controlled conditions to verify its performance.
    • Use a multimeter or other appropriate testing equipment to check the forward voltage and output characteristics.
  7. Storage:

    • Store the device in a dry, cool place away from direct sunlight.
    • Keep the device in its original packaging until ready for use.
(For reference only)

 Inquiry - TLP109(TPL,E