Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the specified range of 1.65V to 3.6V.
   • Connect the ground (GND) pin to a stable ground reference.

2. Input and Output Signals:

   • The input signals should be within the specified input voltage ranges (VIH and VIL).
   • The output signals will be within the specified output voltage ranges (VOH and VOL).

3. Propagation Delay:

   • The propagation delay (tPD) is the time it takes for a change in the input signal to affect the output signal. Ensure that your system timing accounts for this delay.

4. Thermal Management:

   • The device can dissipate up to 360 mW of power. Ensure adequate heat sinking or cooling if operating near the maximum power dissipation.

5. Temperature Range:

   • Operate the device within the specified operating temperature range (-40°C to 85°C) to ensure reliable performance.
   • Store the device within the storage temperature range (-65°C to 150°C) to prevent damage.

6. Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow proper soldering techniques to ensure good electrical connections and prevent thermal damage.

7. Testing:

   • Before integrating the device into a larger system, test it individually to verify its functionality and performance parameters.

8. Compliance:

   • Ensure that the device complies with all relevant safety and regulatory standards for your application.