Share:
Specifications
SKU: 11609432
| Parameter | Description | Value |
|---|---|---|
| Part Number | Component Identifier | RY5W-K |
| Type | Relay Type | 5V DC, SPDT (Single Pole Double Throw) |
| Coil Voltage | Operating Voltage for Coil | 5V DC |
| Coil Current | Current Consumption by Coil | 70mA (max) |
| Contact Form | Contact Configuration | SPDT |
| Contact Rating | Maximum Switching Capacity | 10A @ 250V AC / 10A @ 30V DC |
| Insulation Resistance | Between Contacts and Coil | 100MΩ (min) at 500V DC |
| Dielectric Strength | Between Contacts and Coil | 2500V AC (1 minute) |
| Mechanical Life | Number of Operations Without Load | 10,000 cycles (min) |
| Electrical Life | Number of Operations with Load | 100,000 cycles (min) |
| Operating Temperature | Temperature Range for Operation | -40°C to +85°C |
| Storage Temperature | Temperature Range for Storage | -40°C to +85°C |
| Weight | Weight of the Relay | 10g (approx.) |
| Dimensions | Physical Size of the Relay | 17.5mm x 12.5mm x 12.5mm |
Instructions:
Installation:
- Ensure the relay is mounted on a suitable PCB or chassis.
- Use appropriate connectors and soldering techniques to connect the relay.
Power Supply:
- Connect the coil terminals to a 5V DC power source.
- Ensure the power supply can provide at least 70mA of current to the coil.
Control:
- To activate the relay, apply 5V DC to the coil terminals.
- The relay will switch the contacts accordingly (NO to COM or NC to COM).
Load Connection:
- Connect the load to the NO (Normally Open) and COM (Common) terminals for normally open operation.
- Connect the load to the NC (Normally Closed) and COM (Common) terminals for normally closed operation.
Safety:
- Do not exceed the maximum contact rating (10A @ 250V AC / 10A @ 30V DC).
- Ensure proper insulation and spacing to avoid electrical hazards.
- Store the relay in a dry, cool place when not in use.
Testing:
- Test the relay using a multimeter to verify the continuity of the contacts before and after activation.
- Check the coil resistance to ensure it is within the expected range.
Maintenance:
- Regularly inspect the relay for signs of wear or damage.
- Replace the relay if it fails to operate correctly or shows signs of malfunction.
Inquiry - RY5W-K
