Instructions for Use:

1. Mounting:

   • Ensure the rectifier bridge is mounted on a heatsink if continuous operation at high currents is expected.
   • Use a thermal compound between the rectifier and the heatsink to improve heat dissipation.

2. Soldering:

   • Preheat the PCB to reduce thermal shock.
   • Soldering temperature should not exceed 260°C.
   • Soldering time should be kept to a minimum, typically less than 10 seconds per connection.

3. Electrical Connections:

   • Connect the AC input to the two center terminals (pins 2 and 3).
   • Connect the positive DC output to the top terminal (pin 1).
   • Connect the negative DC output to the bottom terminal (pin 4).

4. Overvoltage Protection:

   • Consider adding overvoltage protection components such as varistors or TVS diodes to protect against voltage spikes.

5. Cooling:

   • For applications where the rectifier will operate near its maximum current rating, ensure adequate cooling to keep the junction temperature within the specified range.

6. Storage:

   • Store the rectifier bridge in a dry, cool place to prevent moisture damage.
   • Avoid exposure to extreme temperatures and direct sunlight.

7. Handling:

   • Handle with care to avoid mechanical damage.
   • Use anti-static precautions to prevent damage from electrostatic discharge (ESD).