Share:
Specifications
SKU: 11613124
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2.7 | - | 5.5 | V | Operating supply voltage range |
| Output Current | IOUT | - | 100 | 200 | mA | Maximum output current per channel |
| Input Voltage Range | VIN | 0 | - | VDD | V | Input voltage range relative to VDD |
| Quiescent Current | IQ | - | 10 | 20 | μA | Current consumption in active mode |
| Shutdown Current | ISD | - | 1 | 2 | μA | Current consumption in shutdown mode |
| Operating Temperature | TOPR | -40 | - | 85 | °C | Operating temperature range |
| Storage Temperature | TSTG | -65 | - | 150 | °C | Storage temperature range |
| Output Leakage Current | IOL | - | 1 | 5 | μA | Leakage current at output |
| Propagation Delay Time | tPD | - | 10 | 20 | ns | Time delay from input to output |
| Rise Time | tR | - | 5 | 10 | ns | Time for output to rise from 10% to 90% |
| Fall Time | tF | - | 5 | 10 | ns | Time for output to fall from 90% to 10% |
| Channel-to-Channel Skew | tSK | - | 2 | 5 | ns | Maximum time difference between channels |
Instructions for Using OB6563CPA
Power Supply:
- Ensure the supply voltage (VDD) is within the specified range of 2.7V to 5.5V.
- Connect the VDD pin to a stable power source and the GND pin to ground.
Input Signals:
- Apply input signals to the appropriate input pins. The input voltage should be within the range of 0V to VDD.
- Ensure that the input signals are clean and free from excessive noise to avoid incorrect operation.
Output Configuration:
- The output current per channel should not exceed 200mA. For higher current applications, consider using external drivers.
- Ensure proper load resistance and capacitance to avoid overloading the output stages.
Quiescent and Shutdown Modes:
- In normal operation, the quiescent current is typically 10μA.
- To enter shutdown mode, apply a low signal to the shutdown pin. The shutdown current will be approximately 1μA.
Temperature Considerations:
- Operate the device within the temperature range of -40°C to 85°C for reliable performance.
- Store the device in an environment with temperatures ranging from -65°C to 150°C.
Signal Timing:
- Be aware of the propagation delay time (tPD), rise time (tR), and fall time (tF) when designing your circuit to ensure proper timing and synchronization.
- Account for the channel-to-channel skew (tSK) if multiple channels are used simultaneously.
Mounting and Handling:
- Handle the device with care to avoid damage from static electricity or mechanical stress.
- Follow standard surface mount technology (SMT) procedures for mounting the device on a PCB.
Testing and Debugging:
- Use an oscilloscope to verify the correct operation of the device by monitoring the input and output signals.
- Check for any unexpected behavior and refer to the datasheet for troubleshooting tips.
By following these guidelines, you can ensure optimal performance and reliability of the OB6563CPA in your application.
(For reference only)Inquiry - OB6563CPA
