Share:
Specifications
SKU: 11613512
| Parameter | Description | Value |
|---|---|---|
| Part Number | Component Identifier | JX5062D |
| Type | Component Type | Diode |
| Package | Physical Package | SOD-123F |
| Forward Voltage (Vf) | Voltage drop across diode when forward biased | 0.7 V (Typical) @ 1 A |
| Reverse Voltage (Vr) | Maximum reverse voltage that can be applied without breakdown | 60 V (Maximum) |
| Continuous Forward Current (If) | Maximum continuous forward current | 1 A (Maximum) |
| Peak Forward Current (Ifsm) | Maximum peak forward current | 30 A (Non-repetitive, 8.3 ms single half sine-wave) |
| Reverse Recovery Time (trr) | Time it takes for the diode to switch from conducting to non-conducting state | 40 ns (Maximum) |
| Operating Temperature Range (Tj) | Junction temperature range | -65°C to +150°C |
| Storage Temperature Range (Tstg) | Temperature range for storage | -65°C to +150°C |
| Thermal Resistance (Rth(j-a)) | Thermal resistance from junction to ambient | 150°C/W |
| Capacitance (Cj0) | Junction capacitance at zero bias | 15 pF (Typical) @ Vr = 0 V, f = 1 MHz |
| Mounting Type | Method of mounting | Surface Mount |
| RoHS Compliance | Compliance with Restriction of Hazardous Substances Directive | Yes |
Instructions:
Handling and Storage:
- Store in a dry, cool place within the specified storage temperature range.
- Handle with care to avoid damage to the leads and body.
Soldering:
- Use a soldering iron with a temperature not exceeding 300°C.
- Soldering time should not exceed 10 seconds per connection.
- Allow the component to cool naturally after soldering.
Mounting:
- Ensure proper alignment of the diode on the PCB.
- Apply moderate pressure to ensure good contact with the PCB pads.
- Avoid excessive bending or twisting of the leads during assembly.
Testing:
- Test the diode using a multimeter set to diode test mode.
- Forward voltage should be around 0.7 V.
- Reverse resistance should be very high.
Operational Considerations:
- Do not exceed the maximum ratings for forward current, reverse voltage, and power dissipation.
- Ensure adequate heat sinking if operating near the maximum power dissipation limits.
- Monitor the junction temperature to prevent overheating.
Inquiry - JX5062D
