Instructions:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Use appropriate tools for soldering to prevent overheating.

2. Soldering:

   • Preheat the PCB to 100°C to 120°C.
   • Soldering temperature should not exceed 350°C.
   • Soldering time should be kept to a minimum, ideally less than 3 seconds per joint.

3. Storage:

   • Store in a dry environment to prevent moisture absorption.
   • Recommended storage temperature: -10°C to +40°C.

4. Mounting:

   • Ensure the resistor is securely mounted on the PCB.
   • Avoid excessive bending or twisting of the leads.

5. Testing:

   • Use a multimeter to verify the resistance value after installation.
   • Check for any short circuits or open circuits.

6. Disposal:

   • Follow local regulations for the disposal of electronic components.
   • Do not incinerate the resistor as it may release harmful substances.