Share:
Specifications
SKU: 11617193
| Parameter | Description | Value |
|---|---|---|
| Part Number | Component Identifier | FDPF12N50T |
| Type | Component Type | MOSFET (N-Channel) |
| Brand | Manufacturer | Fairchild Semiconductor (ON Semiconductor) |
| Package | Housing/Case | TO-247-3, TO-247 |
| Vds (Max) | Drain-to-Source Voltage | 500 V |
| Vgs (Max) | Gate-to-Source Voltage | ±20 V |
| Id (Continuous) | Continuous Drain Current | 12 A |
| Rds(on) (Max) | On-State Resistance at Vgs = 10 V | 0.9 Ω |
| Power Dissipation (Max) | Maximum Power Dissipation | 150 W |
| Operating Temperature Range | Junction Temperature | -55°C to +150°C |
| Storage Temperature Range | Storage Temperature | -65°C to +150°C |
| Gate Charge | Total Gate Charge | 100 nC |
| Input Capacitance | Input Capacitance at Vds = 0 V, f = 1 MHz | 1500 pF |
| Output Capacitance | Output Capacitance at Vds = 0 V, f = 1 MHz | 2500 pF |
| Reverse Transfer Capacitance | Reverse Transfer Capacitance at Vds = 0 V, f = 1 MHz | 500 pF |
| Switching Characteristics | Turn-On Delay Time | 40 ns |
| Switching Characteristics | Rise Time | 80 ns |
| Switching Characteristics | Turn-Off Delay Time | 50 ns |
| Switching Characteristics | Fall Time | 100 ns |
Instructions for Use:
Handling Precautions:
- Handle the device with care to avoid damage to the leads and body.
- Use proper ESD (Electrostatic Discharge) protection to prevent damage from static electricity.
Mounting:
- Ensure that the mounting surface is clean and flat.
- Apply a suitable thermal compound between the device and the heat sink to improve thermal conductivity.
- Torque the mounting screws to the recommended specifications to avoid over-tightening and potential damage.
Soldering:
- Preheat the device to reduce thermal shock.
- Use a soldering iron with a temperature not exceeding 300°C.
- Solder each lead for no more than 3 seconds to avoid overheating.
Operation:
- Ensure that the operating conditions (voltage, current, temperature) do not exceed the maximum ratings.
- Use appropriate gate drive circuits to ensure reliable switching performance.
- Monitor the device temperature during operation to prevent overheating.
Testing:
- Use a multimeter or oscilloscope to verify the correct operation of the device.
- Test the device under controlled conditions to ensure it meets the required specifications.
Storage:
- Store the device in a dry, cool place away from direct sunlight.
- Keep the device in its original packaging until ready for use to protect against moisture and physical damage.
For detailed technical information and additional specifications, refer to the datasheet provided by the manufacturer.
(For reference only)Inquiry - FDPF12N50T ORIGINAL GOODS IN STOCK
