Share:
Specifications
SKU: 11617197
| Parameter | Description | Value |
|---|---|---|
| Part Number | Full Part Number | FGA40N65SMD |
| Type | Component Type | MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) |
| Technology | Technology | N-Channel Enhancement Mode |
| VDS (Max) | Drain-to-Source Voltage | 650 V |
| VGS (Max) | Gate-to-Source Voltage | ±20 V |
| ID (Max) | Continuous Drain Current | 40 A |
| RDS(on) (Max) | On-State Resistance at VGS = 10 V | 0.18 Ω |
| Power Dissipation (Max) | Total Power Dissipation | 320 W |
| Operating Temperature Range | Junction Temperature | -55°C to +175°C |
| Storage Temperature Range | Storage Temperature | -55°C to +150°C |
| Package | Package Type | TO-247-3L |
| Mounting Type | Mounting Type | Through-Hole |
Instructions for Use:
Handling Precautions:
- Handle with care to avoid damage to the leads and body.
- Use proper ESD (Electrostatic Discharge) protection to prevent damage to the device.
Mounting:
- Ensure that the mounting surface is clean and flat.
- Apply thermal paste between the device and the heat sink for optimal heat dissipation.
- Tighten the mounting screws to the recommended torque specifications to avoid over-tightening, which can cause damage to the device.
Electrical Connections:
- Connect the drain, source, and gate terminals as per the circuit diagram.
- Ensure that the gate drive voltage does not exceed the maximum VGS rating.
- Use appropriate gate resistors to control switching speed and reduce electromagnetic interference (EMI).
Thermal Management:
- Ensure adequate cooling to keep the junction temperature within the specified range.
- Monitor the temperature during operation and adjust the cooling solution if necessary.
Testing:
- Test the device in a controlled environment before integrating it into the final application.
- Verify all electrical parameters and performance characteristics to ensure they meet the design requirements.
Storage:
- Store in a dry, cool place away from direct sunlight and sources of heat.
- Keep the device in its original packaging until ready for use to protect against moisture and static damage.
For more detailed information, refer to the datasheet provided by the manufacturer.
(For reference only)Inquiry - FGA40N65SMD ORIGINAL GOODS IN STOCK
