Share:
Specifications
SKU: 11617643
| Parameter | Symbol | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Input Voltage | V_IN | 2.7 | - | 5.5 | V |
| Output Voltage | V_OUT | - | 3.3 | - | V |
| Output Current | I_OUT | - | 100 | - | mA |
| Quiescent Current | I_Q | - | 10 | - | μA |
| Dropout Voltage | V_DROPOUT | - | 0.3 | - | V |
| Load Regulation | - | - | 1% | - | |
| Line Regulation | - | - | 1% | - | |
| PSRR (at 1 kHz) | - | - | 60 | - | dB |
| Operating Temperature | T_OP | -40 | - | 85 | °C |
| Storage Temperature | T_STG | -65 | - | 150 | °C |
Instructions for Use
Input Connection:
- Connect the input voltage (V_IN) to the VIN pin.
- Ensure the input voltage is within the range of 2.7V to 5.5V.
Output Connection:
- Connect the output load to the VOUT pin.
- The typical output voltage is 3.3V, and it can supply up to 100mA of current.
Ground Connection:
- Connect the ground (GND) pin to the common ground of your circuit.
Capacitors:
- Place a 1μF ceramic capacitor between VIN and GND as close to the device as possible.
- Place a 1μF ceramic capacitor between VOUT and GND as close to the device as possible.
Thermal Management:
- Ensure adequate heat dissipation if the device is operating near its maximum output current or in high ambient temperatures.
Stability:
- The device is stable with ceramic capacitors. Avoid using electrolytic capacitors without additional series resistance.
Storage and Handling:
- Store the device in a dry environment within the temperature range of -65°C to 150°C.
- Handle the device with care to avoid static damage. Use appropriate ESD protection.
Testing:
- Before finalizing the design, test the device under all expected operating conditions to ensure it meets performance requirements.
Inquiry - 67L100
