Share:
Specifications
SKU: 11617915
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 3.0 | - | 32 | V | Single supply operation; dual supply ±1.5V to ±16V |
| Supply Current (each op-amp) | ICC | - | 0.8 | - | mA | Quiescent current at 25°C |
| Input Offset Voltage | VIO | - | 2 | - | mV | Maximum at 25°C |
| Input Bias Current | IB | - | 40 | - | nA | Maximum at 25°C |
| Input Offset Current | IOS | - | 10 | - | nA | Maximum at 25°C |
| Common-Mode Input Voltage Range | VCM | 0 | - | VCC-1.5 | V | Includes ground in single-supply applications |
| Differential Input Voltage Range | VID | - | - | ±30 | V | Absolute maximum rating |
| Output Voltage Swing | VO | 0 | - | VCC-1.5 | V | With 2kΩ load to ground |
| Slew Rate | SR | - | 0.5 | - | V/μs | Typical at 25°C |
| Bandwidth (Unity Gain) | fT | - | 1.0 | - | MHz | Typical at 25°C |
| Large Signal Voltage Gain | AV | - | 100,000 | - | V/V | Typical at 25°C |
| Operating Temperature Range | TA | -40 | - | 125 | °C | Industrial temperature range |
Instructions for Using LM324EDT:
Supply Voltage:
- The LM324EDT can operate from a single supply voltage ranging from 3.0V to 32V or from dual supplies ranging from ±1.5V to ±16V.
- Ensure the supply voltage is within these limits to avoid damage.
Powering the Device:
- Connect the positive supply to pin 4 (VCC) and the negative supply to pin 11 (GND) for a single supply configuration.
- For dual supply configurations, connect the positive supply to pin 4 (VCC) and the negative supply to pin 11 (VEE).
Input Signals:
- The common-mode input voltage range includes ground and extends up to VCC - 1.5V.
- The differential input voltage range is ±30V, but do not exceed this limit to prevent damage.
Output Signals:
- The output voltage swing ranges from 0V to VCC - 1.5V with a 2kΩ load to ground.
- Ensure the load resistance is appropriate to achieve the desired output swing.
Biasing and Offset:
- The input bias current is typically 40nA, and the input offset current is typically 10nA.
- Use appropriate biasing techniques to minimize the effects of input offset voltage and current.
Temperature Considerations:
- The device is rated for operation over the industrial temperature range of -40°C to 125°C.
- Ensure the operating environment does not exceed these temperature limits.
Slew Rate and Bandwidth:
- The typical slew rate is 0.5V/μs, which affects the ability to handle fast-changing signals.
- The unity gain bandwidth is typically 1.0MHz, which should be considered when designing high-frequency circuits.
Mounting and Handling:
- Handle the device with care to avoid static discharge and mechanical damage.
- Follow standard PCB layout guidelines to ensure optimal performance and reliability.
By following these parameters and instructions, you can effectively use the LM324EDT in your analog circuit designs.
(For reference only)Inquiry - LM324EDT
