Instructions for HCNR201-550E

1. Forward Current (IF):

   • Ensure the forward current does not exceed 70 mA to avoid damaging the device.
   • For optimal performance, keep the forward current around 50 mA.

2. Forward Voltage (VF):

   • The forward voltage typically ranges from 1.1 V to 1.5 V. Design your circuit to accommodate this range.

3. Reverse Voltage (VR):

   • The device can withstand up to 5 V in reverse bias. Exceeding this value may cause damage.

4. Output Current (IO):

   • The output current can range from 0.1 μA to 10 μA. Adjust your load resistance accordingly to achieve the desired output.

5. Output Resistance (R0):

   • The output resistance is between 10 kΩ and 100 kΩ. This should be considered when designing your circuit to ensure proper signal integrity.

6. Isolation Voltage (VISOL):

   • The device provides isolation up to 500 V. Ensure that your application does not exceed this limit to maintain safety and functionality.

7. Operating Temperature (Toper):

   • The operating temperature range is from -40°C to 105°C. Avoid operating the device outside this range to prevent performance degradation or failure.

8. Storage Temperature (Tstg):

   • Store the device in an environment with temperatures ranging from -65°C to 150°C to ensure long-term reliability.

9. Handling and Installation:

   • Handle the device with care to avoid static discharge and physical damage.
   • Follow standard soldering procedures to ensure reliable connections and prevent thermal stress.

10. Testing:

    • Before integrating the device into your final application, test it under controlled conditions to verify its performance and functionality.

11. Compliance:

    • Ensure that your design complies with relevant safety and regulatory standards for electronic components.