Instructions for Use:

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 4.5V to 5.5V to avoid damage to the device.

2. Standby Current (Icc(s)):

   • The device consumes approximately 20μA in standby mode. This is useful for low-power applications.

3. Operating Current (Icc(o)):

   • During active operation, the device can draw up to 150mA. Ensure your power supply can handle this current.

4. Output Voltage Levels:

   • The output high voltage (VOH) should be at least 2.4V and can go up to the supply voltage (Vcc).
   • The output low voltage (VOL) should not exceed 0.4V.

5. Input Voltage Levels:

   • The input high voltage (VIH) should be at least 2.0V and can go up to the supply voltage (Vcc).
   • The input low voltage (VIL) should not exceed 0.8V.

6. Propagation Delay Time (tpd):

   • The propagation delay time is the time it takes for a change in the input to affect the output. It ranges from 5ns to 15ns.

7. Power-down Time (tpdw):

   • The time it takes for the device to enter power-down mode is between 5ns and 15ns.

8. Output Enable/Disable Times (toeh, toel):

   • The output enable time (toeh) and output disable time (toel) are both between 5ns and 15ns.

9. Operating Temperature (Toper):

   • The device is designed to operate within a temperature range of -40°C to 85°C.

10. Storage Temperature (Tstg):

    • When the device is not in use, it should be stored within a temperature range of -65°C to 150°C.

Additional Notes:

• Always ensure proper decoupling capacitors are placed close to the power pins to reduce noise and improve stability.
• Refer to the datasheet for detailed pin configurations and additional specifications.