Share:
Specifications
SKU: 11624280
| Parameter | Description | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Input Voltage (Vcc) | Operating voltage range | 2.7 | - | 5.5 | V |
| Output Current (Iout) | Maximum output current | - | 100 | - | mA |
| Quiescent Current (Iq) | Current consumption when no load is applied | 0.5 | - | 1.5 | μA |
| Dropout Voltage (Vdo) | Voltage difference between input and output at maximum load | 0.3 | - | 0.6 | V |
| Line Regulation | Change in output voltage due to change in input voltage | - | 0.01 | - | %/V |
| Load Regulation | Change in output voltage due to change in load current | - | 0.01 | - | %/mA |
| Thermal Shutdown Temperature | Temperature at which the device shuts down to prevent damage | - | 150 | - | °C |
| Operating Temperature Range | Ambient temperature range for operation | -40 | - | 85 | °C |
| Storage Temperature Range | Temperature range for storage | -65 | - | 150 | °C |
Instructions for Using MC2102D
Power Supply:
- Ensure the input voltage (Vcc) is within the specified range of 2.7V to 5.5V.
- Use a stable power supply to avoid fluctuations that could affect performance.
Output Configuration:
- Connect the output pin to the load, ensuring the maximum output current does not exceed 100mA.
- Place a bypass capacitor (typically 1μF) close to the output pin to stabilize the output voltage.
Input Capacitor:
- Place a 1μF ceramic capacitor between the input pin and ground to filter out noise and provide stability.
Thermal Management:
- Ensure adequate heat dissipation if the device is operating near its maximum output current or in high ambient temperatures.
- The device will automatically shut down if the temperature exceeds 150°C to prevent damage.
Operating Temperature:
- Operate the device within the temperature range of -40°C to 85°C for optimal performance.
- Store the device within the temperature range of -65°C to 150°C.
Regulation:
- The line regulation and load regulation are both very low (0.01% per V and 0.01% per mA, respectively), ensuring a stable output voltage under varying conditions.
Dropout Voltage:
- The dropout voltage is typically 0.3V to 0.6V, allowing the device to maintain regulation even when the input voltage is close to the output voltage.
Quiescent Current:
- The quiescent current is very low, ranging from 0.5μA to 1.5μA, making the device suitable for battery-powered applications.
By following these instructions, you can ensure reliable and efficient operation of the MC2102D low-dropout linear regulator.
(For reference only)Inquiry - MC2102D
