Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the operating range of 1.65V to 5.5V.
   • Connect the power supply (Vcc) to Pin 5 and ground (GND) to Pin 1.

2. Input and Output Connections:

   • Connect the input signal to Pin 2.
   • The output signal will be available on Pin 3.

3. Enable Pin:

   • The enable pin (Pin 4) should be connected to Vcc for normal operation. If it is grounded, the device will be in high-impedance state.

4. Handling Precautions:

   • Handle the device with care to avoid static discharge which can damage the component.
   • Ensure proper heat dissipation if the device is expected to operate at its maximum current rating.

5. Storage:

   • Store the device in a dry, cool place to prevent moisture damage.
   • Follow recommended storage temperature limits to ensure long-term reliability.

6. Mounting:

   • Solder the device using a soldering iron with a temperature not exceeding 300°C.
   • Ensure that the soldering time does not exceed 10 seconds per joint to avoid thermal stress.

7. Testing:

   • Before final assembly, test the device using a known good circuit to verify functionality.
   • Use a multimeter to check for continuity and correct voltage levels at each pin.

8. Application Notes:

   • This device is suitable for low-power, high-speed digital circuits.
   • It can be used in applications such as data communication, signal conditioning, and logic level translation.