Share:
Specifications
SKU: 11632352
| Parameter | IRFR9024NTRPBF | IRFR9024NPBF |
|---|---|---|
| Device Type | P-Channel MOSFET | P-Channel MOSFET |
| Package | TO-252 (DPAK) | TO-252 (DPAK) |
| VDS (Max) (V) | -55 | -55 |
| VGS (Max) (V) | ±20 | ±20 |
| ID (Continuous) @ 25°C (A) | -6.8 | -6.8 |
| ID (Pulsed) @ 25°C (A) | -14 | -14 |
| RDS(on) @ VGS = -4.5V, ID = -4.6A (mΩ) | 105 | 105 |
| RDS(on) @ VGS = -10V, ID = -6.8A (mΩ) | 75 | 75 |
| Power Dissipation (W) @ TA = 25°C | 3.3 | 3.3 |
| Junction Temperature Range (°C) | -55 to 150 | -55 to 150 |
| Storage Temperature Range (°C) | -65 to 150 | -65 to 150 |
| Operating Temperature Range (°C) | -55 to 150 | -55 to 150 |
| Gate Charge (Qg) @ VDS = -10V, VGS = -10V, ID = -6.8A (nC) | 11 | 11 |
| Input Capacitance (Ciss) @ VDS = -10V, VGS = 0V (pF) | 390 | 390 |
| Output Capacitance (Coss) @ VDS = -10V, VGS = 0V (pF) | 250 | 250 |
| Reverse Transfer Capacitance (Crss) @ VDS = -10V, VGS = 0V (pF) | 140 | 140 |
| Thermal Resistance, Junction to Ambient (°C/W) | 62 | 62 |
| Thermal Resistance, Junction to Case (°C/W) | 35 | 35 |
Instructions for Use:
Handling Precautions:
- ESD Sensitive: Handle with care to avoid electrostatic discharge (ESD) damage. Use ESD protection equipment.
- Moisture Sensitivity: Store in a dry environment to prevent moisture damage.
Mounting:
- Soldering Temperature: Ensure that the soldering temperature does not exceed 260°C for more than 10 seconds.
- Mechanical Stress: Avoid excessive mechanical stress on the leads during assembly.
Biasing:
- Gate-Source Voltage (VGS): Ensure that the gate-source voltage is within the specified range (±20V) to prevent damage.
- Drain-Source Voltage (VDS): Do not exceed the maximum drain-source voltage (-55V).
Thermal Management:
- Heat Sinking: For high-power applications, use a heatsink to manage the junction temperature within the operating range (-55 to 150°C).
- Thermal Interface Material: Apply thermal interface material (TIM) between the device and the heatsink for better heat dissipation.
Testing:
- RDS(on) Measurement: Measure RDS(on) at the specified conditions (VGS = -4.5V, ID = -4.6A or VGS = -10V, ID = -6.8A) to ensure the device is functioning correctly.
- Capacitance Testing: Verify input, output, and reverse transfer capacitances to ensure they are within the specified ranges.
Storage:
- Environmental Conditions: Store in a cool, dry place to prevent degradation.
- Shelf Life: The devices have a long shelf life, but it is recommended to check the specifications before use if stored for extended periods.
Disposal:
- Recycling: Dispose of the components according to local environmental regulations and recycling guidelines.
Inquiry - IRFR9024NTRPBF，IRFR9024NPBF
