Instructions:

1. Input Voltage (VIN): Ensure the input voltage is within the range of 4.5V to 20V. Exceeding these limits can damage the device.
2. Output Voltage (VOUT): The output voltage is fixed at 5V. No external voltage adjustment is required.
3. Output Current (IOUT): The device can provide up to 2A of output current, with a typical value of 1.5A.
4. Quiescent Current (IQ): The quiescent current is typically 0.6mA and should not exceed 1mA.
5. Efficiency (η): The efficiency of the converter is typically 88%.
6. Switching Frequency (fSW): The switching frequency is set to 650kHz.
7. Dropout Voltage (VDROPOUT): The dropout voltage is typically 0.5V.
8. Load Regulation: The load regulation is typically 1%, indicating the output voltage stability under varying load conditions.
9. Line Regulation: The line regulation is also typically 1%, indicating the output voltage stability under varying input voltage conditions.
10. Power Good Output Delay (tPG): The power good output delay is between 1ms and 4ms, with a typical value of 2ms.
11. Short-Circuit Protection (SCP): The device includes active short-circuit protection to prevent damage during short circuits.
12. Thermal Shutdown (TSD): The device has thermal shutdown protection to prevent overheating.
13. Operating Temperature (TOPR): The operating temperature range is from -40°C to 125°C.
14. Storage Temperature (TSTG): The storage temperature range is from -65°C to 150°C.

Ensure all connections are secure and follow the datasheet recommendations for layout and decoupling capacitors to achieve optimal performance.