Share:
Specifications
SKU: 11649960
| Parameter | Description | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage (VDD) | Operating supply voltage | 2.7 | - | 3.6 | V |
| Standby Current (ISB) | Current consumption in standby mode | - | 10 | - | μA |
| Active Current (IACT) | Current consumption in active mode | - | 120 | - | mA |
| Differential Input Voltage (VDIFF) | Maximum differential input voltage | -0.3 | - | VDD + 0.3 | V |
| Common Mode Input Voltage (VCM) | Range of common mode input voltage | 0.4 | - | VDD - 0.4 | V |
| Output Voltage Swing (VOSWING) | Output voltage swing | 0.1 | - | VDD - 0.1 | V |
| Bandwidth (BW) | Small-signal bandwidth | - | 150 | - | MHz |
| Slew Rate (SR) | Slew rate | - | 1000 | - | V/μs |
| Channel-to-Channel Isolation (CCI) | Isolation between channels | - | 70 | - | dB |
| Power-down Time (TPD) | Time to enter power-down mode | - | 1 | - | μs |
| Wake-up Time (TWU) | Time to exit power-down mode | - | 1 | - | μs |
| Operating Temperature (Toper) | Operating temperature range | -40 | - | 85 | °C |
| Storage Temperature (Tstg) | Storage temperature range | -65 | - | 150 | °C |
Instructions for Using ADV8003KBCZ-8
Power Supply:
- Ensure the supply voltage (VDD) is within the specified range of 2.7V to 3.6V.
- Use a stable and clean power source to avoid noise and instability.
Standby Mode:
- To enter standby mode, set the appropriate control pin to the standby state.
- The device will consume approximately 10 μA in this mode.
Active Mode:
- To operate the device in active mode, ensure all necessary power and signal connections are made.
- The device will consume approximately 120 mA in this mode.
Input Signals:
- Ensure the differential input voltage (VDIFF) does not exceed VDD + 0.3V or go below -0.3V.
- The common mode input voltage (VCM) should be within the range of 0.4V to VDD - 0.4V.
Output Signals:
- The output voltage swing (VOSWING) will be from 0.1V to VDD - 0.1V.
- Ensure the load connected to the output can handle the expected voltage levels.
Performance Considerations:
- The small-signal bandwidth (BW) is 150 MHz, suitable for high-frequency applications.
- The slew rate (SR) is 1000 V/μs, which is important for fast signal transitions.
- Channel-to-channel isolation (CCI) is 70 dB, ensuring minimal crosstalk between channels.
Power Management:
- The device can enter and exit power-down mode quickly, with transition times of approximately 1 μs.
Temperature:
- Operate the device within the temperature range of -40°C to 85°C for optimal performance.
- Store the device within the temperature range of -65°C to 150°C to ensure long-term reliability.
Handling and Storage:
- Handle the device with care to avoid static discharge and physical damage.
- Store the device in a dry, cool place to prevent moisture and temperature-related issues.
Inquiry - ADV8003KBCZ-8
