Instructions for Using the MC10136P

1. Power Supply Connection:

   • Connect the input voltage (V_IN) to the VIN pin.
   • Ensure the input voltage is within the range of 2.7V to 5.5V.

2. Output Configuration:

   • The output voltage (V_OUT) is fixed at 3.3V.
   • Connect the load to the VOUT pin.

3. Ground Connection:

   • Connect the ground (GND) pin to the system ground.

4. Shutdown Control:

   • To enable the regulator, connect the SHDN pin to GND or leave it floating.
   • To disable the regulator, pull the SHDN pin high (V_IN).

5. Capacitor Requirements:

   • Place a 1μF ceramic capacitor between VIN and GND close to the device.
   • Place a 1μF ceramic capacitor between VOUT and GND close to the device.

6. Thermal Considerations:

   • Ensure adequate heat dissipation if operating at high load currents.
   • The device can operate over a temperature range of -40°C to 85°C.

7. Storage and Handling:

   • Store the device in a dry environment.
   • Handle with care to avoid damage from static electricity.

8. Package Information:

   • The MC10136P is available in a SOT-23 package.

9. Schematic Example:

   • A typical application circuit should include the necessary capacitors and connections as described above.

10. Safety Precautions:

    • Do not exceed the maximum ratings specified in the table.
    • Avoid short circuits between any pins.
    • Use appropriate protective equipment when handling the device.