Share:
Specifications
SKU: 11655703
| Parameter | Description | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage (Vcc) | Operating voltage range | 4.5 | - | 5.5 | V |
| Output Current (Iout) | Maximum output current | - | 100 | - | mA |
| Operating Temperature (Toper) | Range of operating temperatures | -40 | - | 85 | °C |
| Storage Temperature (Tstg) | Range of storage temperatures | -55 | - | 150 | °C |
| Input Voltage (Vin) | Maximum input voltage | - | - | 6 | V |
| Output Voltage (Vout) | Regulated output voltage | 5 | - | 5 | V |
| Dropout Voltage (Vdo) | Minimum input-to-output voltage difference for regulation | - | 0.2 | - | V |
| Quiescent Current (Iq) | Current consumed by the device under no load | - | 5 | - | mA |
| Load Regulation | Change in output voltage with respect to load current | - | 0.5 | - | % |
| Line Regulation | Change in output voltage with respect to input voltage | - | 0.1 | - | % |
| Ripple Rejection | Ability to reject input ripple | - | 70 | - | dB |
| Thermal Shutdown (TSD) | Temperature at which the device shuts down to prevent damage | - | 160 | - | °C |
Instructions for Use:
Power Supply Connection:
- Connect the supply voltage (Vcc) to the input pin.
- Ensure the supply voltage is within the specified range (4.5V to 5.5V).
Output Connection:
- Connect the load to the output pin.
- The maximum output current should not exceed 100mA.
Ground Connection:
- Connect the ground (GND) pin to the common ground of the system.
Capacitors:
- Place a 10uF tantalum capacitor between the input pin and ground to stabilize the input voltage.
- Place a 1uF ceramic capacitor between the output pin and ground to stabilize the output voltage.
Thermal Considerations:
- Ensure adequate heat dissipation if the device is operating near its maximum output current.
- The device will automatically shut down if the temperature exceeds 160°C to prevent damage.
Operating Environment:
- Operate the device within the specified temperature range (-40°C to 85°C).
- Store the device within the storage temperature range (-55°C to 150°C).
Input Voltage:
- Do not exceed the maximum input voltage of 6V to avoid damaging the device.
Load Regulation:
- The output voltage may vary slightly with changes in load current, but it should remain within 0.5% of the nominal value.
Line Regulation:
- The output voltage may vary slightly with changes in input voltage, but it should remain within 0.1% of the nominal value.
Ripple Rejection:
- The device can effectively reduce input ripple by up to 70dB.
Thermal Shutdown:
- If the device reaches the thermal shutdown temperature, it will turn off to protect itself. Once the temperature drops, it will automatically resume operation.
By following these instructions, you can ensure reliable and efficient operation of the FA5310BP.
(For reference only)Inquiry - FA5310BP
