Instructions for Use:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Avoid exposure to high humidity and corrosive environments.

2. Soldering:

   • Preheat components to 125°C ± 25°C for 5 minutes before soldering.
   • Use a soldering iron with a temperature of 350°C ± 10°C.
   • Soldering time should not exceed 3 seconds per joint.
   • Allow the component to cool naturally after soldering.

3. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Recommended storage temperature: -10°C to +40°C.

4. Mounting:

   • Ensure the PCB is clean and free from contaminants.
   • Place the resistor on the PCB using standard surface mount equipment.
   • Verify the correct orientation and position before soldering.

5. Testing:

   • Test the resistance value using a multimeter after assembly.
   • Ensure the resistance is within the specified tolerance range.

6. Disposal:

   • Dispose of the component according to local regulations for electronic waste.