Instructions for Use:

1. Mounting:

   • Ensure the component is mounted on a flat, clean surface.
   • Avoid mechanical stress or bending of the leads during soldering.

2. Soldering:

   • Use a temperature-controlled soldering iron set to a maximum of 260°C.
   • Soldering time should not exceed 10 seconds per connection.

3. Electrical Connections:

   • Connect the primary side to the high-voltage circuit.
   • Connect the secondary side to the low-voltage circuit.
   • Ensure proper polarity if the component is not bidirectional.

4. Environmental Conditions:

   • Operate within the specified temperature range (-40°C to 125°C).
   • Store the component in a dry environment to prevent moisture damage.

5. Inspection:

   • Visually inspect the component for any physical damage before use.
   • Test the insulation resistance and capacitance values to ensure they meet the specifications.

6. Handling:

   • Handle with care to avoid static discharge.
   • Use appropriate ESD (Electrostatic Discharge) protection measures.

7. Safety:

   • Always follow safety guidelines when working with high-voltage circuits.
   • Ensure proper grounding and isolation to prevent electrical shock.

8. Compliance:

   • Verify that the component meets all relevant safety and regulatory standards for your application.