Instructions for R6011ENX

1. Power Supply Connection:

   • Connect the positive terminal of the power supply to the VIN pin.
   • Connect the negative terminal of the power supply to the GND pin.

2. Output Connection:

   • Connect the load or circuit to be powered to the VOUT pin.
   • Ensure that the load does not exceed the maximum output current of 1.2A.

3. Capacitor Requirements:

   • Place a 1μF ceramic capacitor between VIN and GND as close to the device as possible.
   • Place a 1μF ceramic capacitor between VOUT and GND as close to the device as possible.

4. Thermal Management:

   • Ensure adequate heat dissipation if operating at high output currents or in high ambient temperatures.
   • The thermal resistance (θja) is 75°C/W, so consider using a heatsink if necessary.

5. Operating Temperature:

   • The device can operate from -40°C to 85°C. Ensure the ambient temperature does not exceed these limits.

6. Storage Temperature:

   • Store the device in a dry environment between -65°C and 150°C.

7. Handling Precautions:

   • Handle with care to avoid damaging the pins.
   • Use appropriate ESD protection when handling the device to prevent damage from static electricity.

8. Testing:

   • Before connecting the load, verify the output voltage with a multimeter to ensure it is within the specified range of 3.3V.