Share:
Specifications
SKU: 11678656
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 4.75 | 5.0 | 5.25 | V | Recommended operating supply voltage range |
| Input Voltage (High) | VIH | 2.0 | - | 5.25 | V | Minimum input voltage to be recognized as logic high |
| Input Voltage (Low) | VIL | 0.0 | - | 0.8 | V | Maximum input voltage to be recognized as logic low |
| Output Voltage (High) | VOH | 2.4 | - | 5.0 | V | Minimum output voltage when driving a low input |
| Output Voltage (Low) | VOL | 0.0 | - | 0.5 | V | Maximum output voltage when driving a high input |
| Input Current | IIN | -1.0 | 0 | 1.0 | mA | Maximum current into an input pin |
| Output Current (Source) | IOH | - | - | 0.4 | mA | Maximum current sourced by an output pin |
| Output Current (Sink) | IOL | -8.0 | - | - | mA | Maximum current sunk by an output pin |
| Propagation Delay Time | tpd | 9 | 13 | 19 | ns | Time delay from input transition to output transition |
| Power Dissipation | PD | - | - | 100 | mW | Maximum power dissipation per package |
| Operating Temperature | TA | -55 | - | 125 | °C | Ambient temperature range |
| Storage Temperature | TSTG | -65 | - | 150 | °C | Temperature range for storage |
Instructions for Use:
Power Supply:
- Connect the VCC pin to a 5V power supply.
- Connect the GND pin to ground.
Input Signals:
- Ensure input signals are within the specified voltage range (0.0V to 5.25V).
- Apply logic high (2.0V to 5.25V) or logic low (0.0V to 0.8V) to the input pins.
Output Signals:
- The output pins can source up to 0.4mA and sink up to 8.0mA.
- Ensure the load connected to the output pins does not exceed these current limits.
Propagation Delay:
- The propagation delay time is typically between 9ns and 19ns, depending on the specific device and conditions.
Temperature Considerations:
- Operate the device within the recommended ambient temperature range (-55°C to 125°C).
- Store the device within the storage temperature range (-65°C to 150°C).
Handling Precautions:
- Handle the device with care to avoid static discharge.
- Follow proper soldering techniques to prevent damage during assembly.
Testing:
- Test the device under typical operating conditions to ensure it meets the specified parameters.
Storage:
- Store the device in a dry, cool place to prevent moisture damage.
By following these instructions, you can ensure reliable operation and longevity of the SN74LS27N component.
(For reference only)Inquiry - SN74LS27N
