Share:
Specifications
SKU: 11682328
| Parameter | Symbol | Min | Typ | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Drain-Source Voltage | VDS | - | - | 80 | V | |
| Gate-Source Voltage | VGS | -15 | - | 15 | V | |
| Continuous Drain Current | ID | - | 7 | - | A | @ TC = 25°C |
| Pulse Drain Current | ID(p) | - | 35 | - | A | @ TC = 25°C, tp = 10 μs, Duty Cycle = 1% |
| Power Dissipation | PTOT | - | - | 64 | W | @ TC = 25°C |
| Junction Temperature | TJ | - | - | 150 | °C | |
| Storage Temperature | TSTG | -55 | - | 150 | °C | |
| Gate Charge | QG | - | 19 | - | nC | @ VGS = 10V, ID = 7A |
| Input Capacitance | Ciss | - | 1400 | - | pF | @ VDS = 15V, f = 1 MHz |
| Output Capacitance | Coss | - | 450 | - | pF | @ VDS = 15V, f = 1 MHz |
| Reverse Transfer Capacitance | Crss | - | 110 | - | pF | @ VDS = 15V, f = 1 MHz |
| On-State Resistance | RDS(on) | - | 0.016 | - | Ω | @ VGS = 10V, ID = 7A |
| Threshold Voltage | VGS(th) | 1.5 | 2.5 | 4.0 | V | @ ID = 250 μA |
Instructions for Use:
Handling Precautions:
- The device is sensitive to electrostatic discharge (ESD). Use proper ESD protection measures during handling.
- Avoid exceeding the maximum ratings specified in the table to prevent damage.
Mounting:
- Ensure good thermal management by using appropriate heat sinks or cooling solutions, especially when operating at high power levels.
- Follow the recommended PCB layout guidelines to minimize parasitic inductances and improve performance.
Gate Drive:
- Use a gate resistor to control the switching speed and reduce electromagnetic interference (EMI).
- Ensure the gate voltage (VGS) is within the specified range to avoid damaging the device or compromising its performance.
Thermal Considerations:
- Monitor the junction temperature (TJ) to ensure it does not exceed the maximum rating.
- Use thermal simulation tools to optimize the thermal design of your application.
Storage and Transportation:
- Store the device in a dry, cool place away from direct sunlight.
- Follow the storage temperature range specified in the table to avoid degradation.
Testing:
- Before finalizing the design, perform thorough testing under various conditions to ensure the device meets the required specifications and reliability standards.
For more detailed information, refer to the datasheet provided by the manufacturer.
(For reference only)Inquiry - P7NK80ZFP STP7NK80ZFP
