Instructions for Use:

1. Input Connection:

   • Connect the input voltage (Vin) to the VIN pin. Ensure the input voltage is within the specified range (2.7V to 5.5V).

2. Output Connection:

   • Connect the output voltage (Vout) to the VOUT pin. The device provides a fixed 3.3V output.

3. Ground Connection:

   • Connect the ground (GND) pin to the common ground of your circuit.

4. Capacitors:

   • Place a 1μF ceramic capacitor close to the VIN pin to filter input noise.
   • Place a 1μF ceramic capacitor close to the VOUT pin to stabilize the output voltage.

5. Thermal Management:

   • Ensure adequate heat dissipation, especially when operating at high output currents or in high ambient temperatures. The thermal resistance (θja) is 120°C/W.

6. Load Regulation:

   • The output voltage may vary slightly with changes in load. The load regulation is typically 1%.

7. Line Regulation:

   • The output voltage may vary slightly with changes in input voltage. The line regulation is typically 0.5%.

8. Ripple Rejection:

   • The device can attenuate input ripple by up to 60dB.

9. Operating and Storage Temperature:

   • The device operates reliably within the temperature range of -40°C to 85°C and can be stored between -55°C and 150°C.

10. Handling Precautions:

    • Handle the device with care to avoid static damage. Use proper ESD protection measures.
    • Avoid exceeding the maximum ratings to prevent damage to the device.

By following these instructions, you can ensure optimal performance and reliability of the K100E08N1.