Share:
Specifications
SKU: 11682812
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 1.2 | - | 5.5 | V | Operating supply voltage range |
| Input Voltage (High) | VIH | 0.7VCC | - | VCC | V | Minimum input high voltage |
| Input Voltage (Low) | VIL | 0 | - | 0.3VCC | V | Maximum input low voltage |
| Output Voltage (High) | VOH | 0.9VCC | - | VCC - 0.1 | V | Minimum output high voltage |
| Output Voltage (Low) | VOL | 0 | - | 0.1 | V | Maximum output low voltage |
| Input Current | IIN | -1 | 0 | 1 | μA | Input leakage current |
| Output Current (Source) | IO (source) | - | 25 | 50 | mA | Maximum output source current |
| Output Current (Sink) | IO (sink) | - | 25 | 50 | mA | Maximum output sink current |
| Propagation Delay Time | tpd | - | 6 | 12 | ns | Typical propagation delay time |
| Power Dissipation | PD | - | - | 330 | mW | Maximum power dissipation per package |
| Operating Temperature | TA | -40 | - | 85 | °C | Ambient operating temperature range |
| Storage Temperature | TSTG | -65 | - | 150 | °C | Storage temperature range |
Instructions for Use:
Supply Voltage:
- Ensure the supply voltage is within the specified range (1.2V to 5.5V). Using voltages outside this range can damage the device.
Input Signals:
- Input signals should be within the valid logic levels for the given supply voltage. High inputs should be at least 0.7VCC, and low inputs should not exceed 0.3VCC.
Output Loads:
- The device can source or sink up to 50mA per output. Ensure that the load does not exceed these limits to avoid damage.
Propagation Delay:
- The typical propagation delay is 6ns, but it can vary between 6ns and 12ns. This is important for timing considerations in your circuit.
Power Dissipation:
- The maximum power dissipation is 330mW. Ensure proper heat management if the device is expected to operate near this limit.
Temperature Range:
- The device is designed to operate within an ambient temperature range of -40°C to 85°C. Store the device in temperatures ranging from -65°C to 150°C.
Handling:
- Handle the device with care to avoid static discharge, which can damage the internal circuits. Use proper ESD protection measures.
Mounting:
- Ensure that the device is properly mounted on the PCB to avoid mechanical stress, which can affect performance and reliability.
By following these parameters and instructions, you can ensure reliable and efficient operation of the 74AHC32D,118 IC.
(For reference only)Inquiry - 74AHC32D,118
