Share:
Specifications
SKU: 11686090
| Parameter | Symbol | Conditions | Min | Typical | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | - | 4.5 | - | 36 | V |
| Quiescent Current | IQ | VCC = 15V, no load | - | 3.0 | - | mA |
| Output Current (Sink) | IOUT(sink) | VCC = 15V | 10 | - | 20 | mA |
| Output Current (Source) | IOUT(source) | VCC = 15V | 10 | - | 20 | mA |
| Input Offset Voltage | VIO | - | - | 2.0 | - | mV |
| Input Bias Current | IIB | - | - | 5.0 | - | nA |
| Common-Mode Input Range | VCM | - | 0 | - | VCC - 1.5 | V |
| Differential Input Voltage | VID | - | - | - | ±30 | V |
| Slew Rate | SR | - | - | 0.3 | - | V/μs |
| Operating Temperature | TA | - | -40 | - | 85 | °C |
| Storage Temperature | TSTG | - | -65 | - | 150 | °C |
Instructions for Use:
Power Supply:
- Ensure the supply voltage (VCC) is within the range of 4.5V to 36V.
- Use appropriate decoupling capacitors (typically 0.1μF and 10μF) close to the power pins to minimize noise and ensure stable operation.
Input Signals:
- The common-mode input range should be between 0V and VCC - 1.5V.
- The differential input voltage can be up to ±30V without damaging the device.
Output Configuration:
- The output can sink or source up to 20mA.
- For optimal performance, use a load resistor that matches the output current capability.
Temperature Considerations:
- Operate the device within the temperature range of -40°C to 85°C for reliable performance.
- Store the device within the storage temperature range of -65°C to 150°C.
Handling:
- Handle the device with care to avoid electrostatic discharge (ESD) damage.
- Follow proper soldering techniques and avoid excessive heat during assembly.
Layout:
- Keep signal paths short and direct to minimize noise and interference.
- Use ground planes to reduce noise and improve thermal dissipation.
Testing:
- Before finalizing the design, perform thorough testing under various conditions to ensure the device meets all performance specifications.
Inquiry - LM7322MAX/NOPB
