Instructions for Use:

1. Power Supply:

   • The AD633JNZ can operate from dual supplies (±7.5V to ±15V) or a single supply (+15V to +30V).
   • Ensure the power supply is stable and within the specified range to avoid damage.

2. Input Connections:

   • Connect the differential input signals to the X1, X2, Y1, and Y2 pins.
   • The maximum differential input voltage range is ±10V.

3. Output Connections:

   • The output is available at the Z pin.
   • The output voltage range is ±10V, depending on the supply voltage.

4. Biasing and Grounding:

   • Properly ground the circuit to minimize noise and ensure accurate operation.
   • Use decoupling capacitors (typically 0.1 μF) close to the power supply pins to filter out high-frequency noise.

5. Gain and Operation:

   • The gain of the AD633JNZ is set by external resistors. Refer to the datasheet for specific resistor values and configurations.
   • The device can perform multiplication, division, squaring, and square root functions.

6. Temperature Considerations:

   • Operate the device within the specified temperature range (-40°C to 85°C) to ensure reliable performance.
   • Store the device in a temperature range of -65°C to 150°C.

7. Handling and ESD Protection:

   • Handle the device with care to avoid damage from electrostatic discharge (ESD).
   • Use proper ESD protection equipment when handling the device.

8. Testing and Troubleshooting:

   • Before connecting the device to your circuit, verify all connections and power supply levels.
   • Use a multimeter to check for short circuits and open circuits.
   • If the device does not function as expected, refer to the troubleshooting section of the datasheet for common issues and solutions.