Share:
Specifications
SKU: 11713055
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Supply Voltage | VIN | 5.5 | - | 32 | V | Operating range for the motor driver |
| Quiescent Current | IQ | - | 2.5 | - | mA | With no load and no input signals |
| Logic Input Voltage | VIL | - | 2.0 | 5.5 | V | Low-level input voltage |
| Logic Input Voltage | VIH | 2.0 | - | 5.5 | V | High-level input voltage |
| Output Current per Channel | IOUT | - | - | 30 | A | Continuous current, derated above 25°C |
| Peak Output Current | IPEAK | - | - | 40 | A | Peak current, derated above 25°C |
| Thermal Shutdown | TSD | - | - | 160 | °C | Temperature at which the device shuts down to prevent damage |
| Operating Temperature | TA | -40 | - | 125 | °C | Ambient temperature range |
| Storage Temperature | TSTG | -40 | - | 150 | °C | Temperature range for storage |
Instructions
Supply Voltage (VIN):
- Ensure the supply voltage is within the range of 5.5V to 32V.
- Use a stable power source to avoid voltage fluctuations that can affect performance.
Logic Input Voltage (VIL, VIH):
- For low-level inputs, ensure the voltage is below 2.0V.
- For high-level inputs, ensure the voltage is between 2.0V and 5.5V.
- Use appropriate logic levels compatible with your control circuitry.
Output Current (IOUT):
- The continuous output current per channel should not exceed 30A.
- For peak currents up to 40A, ensure the device is properly heat-sinked to manage thermal dissipation.
Thermal Management:
- Monitor the operating temperature to ensure it does not exceed 125°C.
- Use a heatsink or cooling solution if the device is expected to operate near its maximum current ratings.
Thermal Shutdown:
- The device will automatically shut down if the temperature exceeds 160°C to prevent damage.
- Allow the device to cool down before resuming operation.
Operating and Storage Temperature:
- Ensure the ambient temperature is within the range of -40°C to 125°C during operation.
- Store the device in an environment where the temperature does not exceed 150°C.
Handling and Installation:
- Handle the device with care to avoid static discharge.
- Follow proper soldering techniques to ensure reliable connections.
- Ensure all connections are secure and free from shorts or open circuits.
By following these parameters and instructions, you can ensure the VNH3ASP30-E operates efficiently and safely in your application.
(For reference only)Inquiry - VNH3ASP30-E
