Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the specified range of 2.3V to 5.5V.
   • Use a stable power source to avoid fluctuations that could affect performance.

2. Signal Levels:

   • The input signals should be within the valid high (VIH) and low (VIL) levels.
   • The output signals will be within the specified high (VOH) and low (VOL) levels.

3. Propagation Delay:

   • The propagation delay (tpd) is the time it takes for the output to respond to a change in the input. Ensure that your system timing accounts for this delay.

4. Power Consumption:

   • The device typically consumes around 20mA, but can go up to 30mA under maximum conditions. Design your power supply to handle this current.

5. Temperature Range:

   • The device is designed to operate within a temperature range of -40°C to 85°C. Store the device between -65°C and 150°C.

6. Handling:

   • Handle the device with care to avoid static damage. Use proper ESD protection measures during handling and installation.

7. Mounting:

   • Follow standard surface mount technology (SMT) procedures for mounting the device on a PCB. Ensure proper soldering and cooling to prevent thermal damage.

8. Testing:

   • After installation, test the device to ensure it meets the specified parameters. Use a multimeter or oscilloscope to verify signal levels and timing.

9. Documentation:

   • Refer to the datasheet for more detailed information and specific application notes.