Share:
Specifications
SKU: 11720321
| Parameter | Value | Unit |
|---|---|---|
| Type | Zener Diode | - |
| Maximum Repetitive Peak Reverse Voltage (V_RRM) | 600 | V |
| Zener Voltage (V_Z) | 13V, 15V, 18V, 24V | V |
| Zener Tolerance (ΔV_Z) | ±5% | % |
| Maximum Zener Current (I_ZM) | 5.0 | A |
| Operating Temperature Range (T_A) | -65 to +150 | °C |
| Storage Temperature Range (T_STG) | -65 to +150 | °C |
| Power Dissipation (P_T) | 50 | W |
| Forward Voltage (V_F) at 1A | 1.0 | V |
| Reverse Leakage Current (I_R) at 25°C | 5 | μA |
| Case Style | DO-41 | - |
Instructions for Use:
Mounting:
- Ensure that the diode is mounted on a suitable heat sink to dissipate the power effectively.
- Use appropriate mounting hardware to secure the diode without excessive force.
Soldering:
- Preheat the diode and the PCB to reduce thermal shock.
- Use a soldering iron with a temperature not exceeding 350°C.
- Soldering time should not exceed 10 seconds.
Electrical Connections:
- Connect the cathode (K) to the positive side of the circuit and the anode (A) to the negative side for proper operation.
- Ensure that the maximum reverse voltage (V_RRM) is not exceeded to prevent breakdown.
Thermal Management:
- Monitor the operating temperature to ensure it stays within the specified range (-65°C to +150°C).
- Use thermal paste between the diode and the heat sink for better thermal conductivity.
Storage:
- Store the diode in a dry, cool place away from direct sunlight.
- Avoid exposure to corrosive gases or environments.
Handling:
- Handle the diode with care to avoid mechanical damage.
- Use anti-static wrist straps to prevent electrostatic discharge (ESD) damage.
Testing:
- Test the diode using a multimeter set to the diode test mode to verify forward and reverse characteristics.
- Ensure that the zener voltage is within the specified tolerance.
Safety:
- Always follow safety guidelines when working with high voltages and currents.
- Use appropriate personal protective equipment (PPE) as needed.
Inquiry - D2058
