Instructions for Using the CD40175BCN

1. Supply Voltage:

   • Ensure the supply voltage (V_CC) is within the range of 3 to 18 volts.

2. Input Signals:

   • For a high input signal, the voltage should be between 2V and (V_CC - 1.5V).
   • For a low input signal, the voltage should be between 0V and 0.8V.

3. Output Signals:

   • When the output is high, the voltage will be between (V_CC - 0.1V) and (V_CC - 0.5V).
   • When the output is low, the voltage will be between 0V and 0.5V.

4. Propagation Delay:

   • The propagation delay time is typically 45 nanoseconds at a supply voltage of 5V and a frequency of 1 MHz.

5. Power Dissipation:

   • The maximum power dissipation is 500 milliwatts at an ambient temperature of 25°C.

6. Temperature Ranges:

   • The operating temperature range is from -40°C to 85°C.
   • The storage temperature range is from -65°C to 150°C.

7. Handling and Storage:

   • Store the device in a dry environment to prevent moisture damage.
   • Handle with care to avoid static discharge, which can damage the device.

8. Circuit Design:

   • Use appropriate decoupling capacitors near the power supply pins to filter out noise.
   • Ensure all unused inputs are tied to a known state (either V_CC or GND) to prevent floating inputs.

9. Testing:

   • Test the device under specified conditions to ensure it meets the required performance parameters.
   • Use a multimeter to verify the input and output voltages.

10. Safety:

    • Follow standard safety guidelines when working with electronic components.
    • Avoid exceeding the maximum ratings to prevent damage to the device.