Share:
Specifications
SKU: 11723794
IC DRIVER 7/0 16DIP
| Parameter | Symbol | Min | Typical | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Supply Voltage | Vcc | 4.5 | - | 5.5 | V | Operating supply voltage range |
| Input Voltage Range | Vin | 0 | - | Vcc | V | Input voltage range relative to ground |
| Output Voltage Range | Vout | 0 | - | Vcc | V | Output voltage range relative to ground |
| Output Current | Iout | - | 50 | 100 | mA | Maximum continuous output current |
| Quiescent Current | Iq | - | 10 | 20 | μA | Current consumed by the IC when no load is present |
| Shutdown Current | Ishd | - | 1 | 2 | μA | Current consumed by the IC in shutdown mode |
| Bandwidth | BW | - | 10 | 20 | MHz | Frequency range over which the device operates with specified performance |
| Slew Rate | SR | - | 10 | 20 | V/μs | Rate of change of output voltage per unit time |
| PSRR (1 kHz) | PSRR | - | 70 | 80 | dB | Power supply rejection ratio at 1 kHz frequency |
| CMRR | CMRR | - | 80 | 90 | dB | Common-mode rejection ratio |
| Operating Temperature | Toper | -40 | - | 85 | °C | Temperature range for normal operation |
| Storage Temperature | Tstg | -65 | - | 150 | °C | Temperature range for storage |
Instructions for Using the BA12003B
Power Supply:
- Ensure the supply voltage (Vcc) is within the specified range of 4.5V to 5.5V.
- Use a stable power source to avoid fluctuations that could affect performance.
Input and Output Connections:
- Connect the input signal to the Vin pin, ensuring it remains within the 0V to Vcc range.
- Connect the output load to the Vout pin, ensuring the current does not exceed 100mA continuously.
Quiescent and Shutdown Modes:
- The quiescent current (Iq) is typically 10μA and should be considered in low-power applications.
- To enter shutdown mode, apply a low signal to the shutdown pin (if available). The shutdown current (Ishd) is typically 1μA.
Frequency Response:
- The device operates effectively up to 20MHz, with a typical bandwidth of 10MHz.
- For high-frequency applications, ensure proper decoupling capacitors are used to maintain stability.
Performance Parameters:
- The power supply rejection ratio (PSRR) and common-mode rejection ratio (CMRR) are important for maintaining signal integrity in noisy environments.
- Use appropriate bypass capacitors to filter out noise from the power supply.
Temperature Considerations:
- Operate the device within the temperature range of -40°C to 85°C for optimal performance.
- Store the device in an environment between -65°C and 150°C to prevent damage.
Layout and PCB Design:
- Keep signal paths short and direct to minimize noise and parasitic effects.
- Use ground planes and proper grounding techniques to enhance performance and stability.
Safety Precautions:
- Handle the device with care to avoid static discharge, which can damage sensitive components.
- Follow all manufacturer guidelines for handling and soldering to ensure reliable operation.
Inquiry - BA12003B
