Instructions:

1. Power Supply:

   • Ensure the input voltage is within the specified range (1.2V to 1.8V).
   • The output voltage should be between 3.0V and 3.4V when the output is open.

2. Current Ratings:

   • The forward current (IF) should be maintained between 20mA and 40mA.
   • The maximum output current (IO) should not exceed 25mA.

3. Isolation:

   • The device provides an isolation voltage (VIORM) of up to 5000Vrms. Ensure that the input and output circuits are properly isolated to avoid electrical hazards.

4. Timing:

   • The propagation delay time (tPD) is typically 2.0μs, with a range of 1.5μs to 2.5μs.
   • The pulse width distortion (tPWD) should be within ±1ns.

5. Environmental Conditions:

   • The operating temperature (Toper) range is from -40°C to 105°C.
   • The storage temperature (Tstg) range is from -65°C to 150°C.

6. Common Mode Transient Immunity (CMTI):

   • The device has a CMTI of 25kV/μs, which helps in maintaining signal integrity in the presence of high-speed transients.

7. Handling and Storage:

   • Store the device in a dry, cool place to prevent damage.
   • Handle the device with care to avoid mechanical stress or damage to the leads.

8. Mounting:

   • Ensure proper soldering techniques are used to avoid thermal shock and mechanical stress.
   • Use appropriate heat sinks if necessary to manage thermal dissipation.

9. Testing:

   • Before final assembly, test the device under typical operating conditions to ensure it meets the specified parameters.