Share:
Specifications
SKU: 11728543
| Parameter | Description | Value |
|---|---|---|
| Part Number | Component Identifier | SRK2001ATR |
| Type | Device Type | Schottky Rectifier |
| Package | Package Type | SOD-123FL |
| Maximum Reverse Voltage (VRM) | Maximum DC or repetitive peak reverse voltage | 200V |
| Maximum Average Forward Current (IF(AV)) | Maximum average forward current at Tc = 75°C | 1A |
| Peak Forward Surge Current (IFSM) | Non-repetitive peak forward surge current, 8.3ms single half sine-wave, Tj = 25°C | 8A |
| Forward Voltage (VF) | Forward voltage drop at IF = 1A, Tj = 25°C | 0.6V max |
| Reverse Recovery Time (trr) | Reverse recovery time at IF = 1A, di/dt = 100A/μs, Tj = 25°C | 35ns max |
| Junction Temperature (Tj) | Operating junction temperature range | -65°C to +150°C |
| Storage Temperature (Tstg) | Storage temperature range | -65°C to +150°C |
| Thermal Resistance (RθJA) | Junction-to-ambient thermal resistance | 200°C/W |
| Mounting Type | Surface Mount | Yes |
| Polarity | Polarity Indication | Anode and Cathode Marked on Package |
Instructions for Use:
Handling Precautions:
- Handle with care to avoid mechanical damage.
- Avoid exposure to high temperatures and humidity during storage and handling.
Soldering:
- Use a soldering iron with a temperature not exceeding 300°C.
- Soldering time should not exceed 10 seconds per joint.
- Allow the device to cool naturally after soldering.
Mounting:
- Ensure proper orientation of the device (anode and cathode) as marked on the package.
- Use appropriate PCB layout to ensure good thermal management, especially for high current applications.
Electrical Testing:
- Test the device under specified conditions to ensure it meets the electrical parameters listed.
- Use a suitable test setup to avoid damaging the device during testing.
Operating Conditions:
- Ensure that the operating conditions (voltage, current, temperature) do not exceed the maximum ratings.
- Provide adequate cooling if the device is used in high-power applications.
Storage:
- Store in a dry, cool place away from direct sunlight.
- Follow the recommended storage temperature range to prevent degradation.
Compliance:
- Ensure compliance with relevant safety and regulatory standards for your application.
Inquiry - SRK2001ATR
