Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 2.7V to 5.5V.
   • Connect the power supply to the VDD pin and ground (GND) pin.

2. Input Signals:

   • The input signals should be within the common-mode input range, which is typically from 0V to VDD - 0.1V.
   • Avoid exceeding the maximum input voltage to prevent damage to the device.

3. Output Configuration:

   • The output voltage swing can range from 0.1V to 3.6V. Ensure the load is properly matched to the output impedance of the device.
   • For optimal performance, use a bypass capacitor (e.g., 0.1 μF) between the output and ground.

4. Thermal Management:

   • The operating temperature range is -40°C to 85°C. Ensure adequate heat dissipation if operating at higher temperatures.
   • The storage temperature range is -55°C to 150°C. Store the device in a dry environment to prevent moisture damage.

5. Handling and Storage:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow proper ESD (Electrostatic Discharge) precautions when handling the device.

6. Testing and Troubleshooting:

   • Before connecting the device to your circuit, verify the power supply and signal levels.
   • If the device does not function as expected, check for proper connections, correct power supply voltage, and input signal integrity.

7. Application Notes:

   • Refer to the datasheet for detailed application notes and circuit diagrams.
   • For high-frequency applications, consider the bandwidth and slew rate limitations of the device.