Instructions for Use:

1. Input Connection:

   • Connect the input voltage (VIN) to the power supply.
   • Ensure the input voltage is within the specified range (4.5V to 28V).

2. Output Configuration:

   • Adjust the output voltage (VOUT) using the external resistor divider network.
   • The output voltage can be set between 0.8V and 18V.

3. Output Load:

   • The maximum continuous output current (IOUT) is 3A.
   • Ensure the load does not exceed this limit to avoid damage.

4. Efficiency:

   • The efficiency is typically 92% at full load when converting from 12V to 5V.
   • Monitor the temperature and efficiency under different load conditions.

5. Quiescent Current:

   • The quiescent current (IQ) is approximately 25μA with no load.
   • This low quiescent current helps in reducing power consumption in low-power applications.

6. Regulation:

   • Line regulation (ΔVOUT/ΔVIN) is typically 0.01% per volt.
   • Load regulation (ΔVOUT/ΔIOUT) is typically 0.05% per ampere.
   • These parameters ensure stable output voltage under varying input and load conditions.

7. Dropout Voltage:

   • The dropout voltage (VDROPOUT) is typically 1.2V at full load.
   • Ensure the input voltage is sufficiently higher than the output voltage to maintain regulation.

8. PSRR (Power Supply Rejection Ratio):

   • The PSRR is typically 60dB at 1kHz.
   • This helps in filtering out noise from the input power supply.

9. Temperature Considerations:

   • The operating temperature range (TOPR) is -40°C to 125°C.
   • The storage temperature range (TSTG) is -65°C to 150°C.
   • Ensure the device operates within these temperature limits to avoid thermal stress.

10. Package Type:

    • The DP8473V is available in a SOT-23 package.
    • Follow standard PCB layout guidelines for SOT-23 packages to ensure reliable operation.