Share:
Specifications
SKU: 11737713
| Parameter | Description | Value |
|---|---|---|
| Device Type | Type of device | CPLD (Complex Programmable Logic Device) |
| Family | Family of the device | FLEX 10K |
| Part Number | Specific part number | EPF10K20TC144-4 |
| Package | Package type | TQFP (Thin Quad Flat Package) |
| Pins | Number of pins | 144 |
| Speed Grade | Speed grade of the device | -4 (fastest for this family) |
| Logic Cells | Number of logic cells | 20,000 |
| I/O Pins | Number of I/O pins | 132 |
| Internal Memory (bits) | Internal memory size | 576 bits |
| Max. Operating Frequency | Maximum operating frequency | 181 MHz |
| Supply Voltage (Vcc) | Supply voltage range | 3.3V ± 5% |
| Standby Current | Current consumption in standby mode | 50 μA |
| Active Power | Power consumption in active mode | 1.5 W (typical) |
| Temperature Range | Operating temperature range | -40°C to +85°C |
| Configuration Method | Method for configuring the device | JTAG, AS (Active Serial), PS (Passive Serial) |
| Programming Voltage | Voltage required for programming | 3.3V |
| Programming Time | Typical time required for programming | 20 ms (for full configuration) |
| ESD Protection | Electrostatic discharge protection | 2000 V (HBM) |
| RoHS Compliance | Compliance with Restriction of Hazardous Substances Directive | Yes |
Instructions for Use
Power Supply:
- Ensure that the supply voltage (Vcc) is within the specified range of 3.3V ± 5%.
- Connect the ground (GND) pin to a stable ground reference.
Configuration:
- Use one of the supported configuration methods: JTAG, Active Serial (AS), or Passive Serial (PS).
- For JTAG, connect the TDI, TDO, TCK, and TMS pins to the JTAG interface.
- For AS, connect the AS_DATA, AS_CLK, and AS_DCLK pins to the configuration source.
- For PS, connect the PS_DATA and PS_CLK pins to the configuration source.
Programming:
- Use a compatible programmer or software to load the configuration file.
- Ensure the programming voltage is set to 3.3V.
- The typical programming time is 20 ms for a full configuration.
Operating Conditions:
- Operate the device within the specified temperature range of -40°C to +85°C.
- Avoid exceeding the maximum operating frequency of 181 MHz to prevent performance issues.
Handling:
- Handle the device with care to avoid ESD damage.
- Store the device in an ESD-protected environment when not in use.
Testing:
- After programming, verify the functionality of the device using appropriate test vectors.
- Monitor power consumption and ensure it does not exceed the specified active power of 1.5 W (typical).
Documentation:
- Refer to the datasheet and user manual for detailed information on pinouts, timing diagrams, and advanced features.
Inquiry - EPF10K20TC144-4
