Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VDD to VSS) is within the operating range of 1.8V to 5.5V.
   • Connect VDD to the positive power supply and VSS to ground.

2. Signal Input:

   • The analog signal should be within the range of VSS to VDD.
   • Avoid exceeding these limits to prevent damage to the device.

3. Control Inputs:

   • Use the control inputs (IN1, IN2, IN3, IN4) to switch the corresponding channels (S1, S2, S3, S4).
   • Apply a logic high (VDD) or low (VSS) to the control inputs to turn the switches on or off.

4. Powering Down:

   • To power down the device, set VDD to VSS (0V).
   • Alternatively, set all control inputs to a low state to turn off all switches.

5. Handling:

   • Handle the device with care to avoid static discharge, which can damage the sensitive components.
   • Follow ESD (Electrostatic Discharge) precautions during handling and installation.

6. Mounting:

   • Solder the device according to the recommended soldering profile for TSSOP packages.
   • Ensure proper thermal management to keep the device within the operating temperature range.

7. Testing:

   • After installation, test the device to ensure it meets the specified performance parameters.
   • Check the on-resistance and leakage current to verify proper operation.

8. Storage:

   • Store the device in a dry, cool environment to prevent moisture damage.
   • Follow the storage temperature guidelines to ensure long-term reliability.