Share:
Specifications
SKU: 11743100
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Collector-Emitter Voltage | VCE(off) | - | - | 600 | V | Maximum voltage between collector and emitter when the device is off |
| Gate-Emitter Voltage | VGE(th) | 2.0 | 4.0 | 6.0 | V | Gate-emitter threshold voltage |
| Continuous Collector Current | IC | - | - | 4.4 | A | Maximum continuous current through the collector |
| Pulse Collector Current (tp = 10 μs) | IC(sm) | - | - | 15 | A | Maximum pulse current through the collector |
| Power Dissipation | PTOT | - | - | 90 | W | Maximum power dissipation |
| Junction Temperature | TJ | - | - | 150 | °C | Maximum junction temperature |
| Storage Temperature | TSTG | -55 | - | 150 | °C | Temperature range for storage |
| Operating Temperature | TA | -55 | - | 150 | °C | Ambient operating temperature range |
Instructions for Use:
Mounting and Handling:
- Ensure that the device is handled with care to avoid mechanical damage.
- Use appropriate heat sinks to manage the thermal resistance and ensure the junction temperature does not exceed 150°C.
Electrical Connections:
- Connect the collector (C) to the load or circuit being controlled.
- Connect the emitter (E) to the common ground or return path.
- Apply the gate (G) voltage relative to the emitter to control the device.
Gate Drive:
- The gate-emitter threshold voltage (VGE(th)) is typically between 2.0V and 6.0V. Ensure that the gate drive voltage is within this range to properly turn on the device.
- For reliable operation, apply a gate voltage slightly above the maximum threshold voltage to ensure full turn-on.
Current Limiting:
- Do not exceed the continuous collector current (IC) of 4.4A or the pulse collector current (IC(sm)) of 15A for short pulses.
- Use current limiting resistors or other protective measures if necessary to prevent overcurrent conditions.
Thermal Management:
- Monitor the junction temperature (TJ) to ensure it does not exceed 150°C.
- Use heatsinks and thermal compounds to improve heat dissipation, especially under high power conditions.
Storage and Operating Conditions:
- Store the device in a dry environment within the temperature range of -55°C to 150°C.
- Operate the device within the ambient temperature range of -55°C to 150°C to ensure reliable performance.
Testing and Verification:
- Before integrating the device into a circuit, verify its parameters using a suitable test setup.
- Check for proper connections and ensure that all components are functioning as expected.
By following these instructions, you can ensure the reliable and efficient operation of the IXFX44N60 transistor.
(For reference only)Inquiry - IXFX44N60
