Specifications
SKU: 11743518
Parameter | Description | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Supply Voltage (VCC) | Operating supply voltage range | 2.8 | - | 5.5 | V |
Output Current (IOL) | Output low current | - | - | 10 | mA |
Output High Voltage (VOH) | Output high voltage at IOH = -0.4 mA | 2.4 | - | VCC-0.3 | V |
Output Low Voltage (VOL) | Output low voltage at IOL = 10 mA | 0 | - | 0.4 | V |
Input Voltage (VIH) | Input high voltage | 2.0 | - | VCC | V |
Input Voltage (VIL) | Input low voltage | 0 | - | 0.8 | V |
Propagation Delay (tpd) | Propagation delay time | 20 | - | 60 | ns |
Power Consumption (ICC) | Quiescent current | 0 | - | 1 | μA |
Operating Temperature (Toper) | Operating temperature range | -40 | - | 85 | °C |
Storage Temperature (Tstg) | Storage temperature range | -65 | - | 150 | °C |
Instructions for DS2107AS:
Power Supply:
- Ensure the supply voltage (VCC) is within the specified range of 2.8V to 5.5V.
- Connect the VCC pin to a stable power source and GND to ground.
Output Configuration:
- The output pins can sink up to 10 mA when low (VOL ≤ 0.4V).
- When high, the output voltage (VOH) will be at least 2.4V or VCC - 0.3V, whichever is lower.
Input Levels:
- Input high voltage (VIH) should be between 2.0V and VCC.
- Input low voltage (VIL) should be between 0V and 0.8V.
Propagation Delay:
- The propagation delay (tpd) is the time it takes for the output to change state after the input changes. It ranges from 20ns to 60ns.
Power Consumption:
- The quiescent current (ICC) is very low, typically less than 1 μA.
Temperature Range:
- The device can operate within a temperature range of -40°C to 85°C.
- Store the device in a temperature range of -65°C to 150°C.
Handling Precautions:
- Handle the device with care to avoid electrostatic discharge (ESD) damage.
- Use appropriate ESD protection measures during handling and installation.
Application Notes:
- Refer to the datasheet for detailed application notes and circuit diagrams to ensure optimal performance.
Inquiry - DS2107AS