Instructions:

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the specified range of 4.75V to 5.25V to avoid damage to the device.

2. Standby Current (Icc):

   • The typical standby current is 0.5mA. Ensure the power supply can handle this current draw.

3. Operating Temperature (Tamb):

   • The device can operate in ambient temperatures ranging from -40°C to 85°C. Avoid exposing the device to temperatures outside this range.

4. Storage Temperature (Tstg):

   • Store the device in temperatures between -65°C and 150°C to prevent damage.

5. Output Current (Iout):

   • Each output pin can source or sink up to 25mA. Do not exceed this limit to avoid damaging the device.

6. Output Low Voltage (VOL):

   • The output voltage at a low level is typically 0.4V. This ensures proper logic level recognition.

7. Output High Voltage (VOH):

   • The output voltage at a high level is typically 4.6V, ensuring a strong logic high signal.

8. Input Voltage (VIN):

   • The input voltage should be within the range of 0V to Vcc to ensure proper operation.

9. Propagation Delay (tpd):

   • The typical propagation delay is 15ns. This is the time it takes for a change in the input to affect the output.

10. Power Dissipation (Pd):

    • The maximum power dissipation is 750mW. Ensure adequate heat dissipation if the device is expected to operate near this limit.