Instructions for Use

1. Mounting and Handling:

   • Handle the PS2501-4-A with care to avoid mechanical stress.
   • Ensure proper alignment during mounting to prevent damage to the leads.

2. Electrical Connections:

   • Connect the input and output sides according to the pin configuration diagram provided in the datasheet.
   • Ensure that the working voltage does not exceed the maximum rated value of 400 Vdc.

3. Environmental Conditions:

   • Operate the device within the specified temperature range (-40°C to 125°C).
   • Store the device in a dry environment with relative humidity not exceeding 95%.

4. Insulation Testing:

   • Regularly check the insulation resistance to ensure it remains above 500 MΩ.
   • Perform leakage current testing to ensure it stays below 1 μA.

5. Safety Precautions:

   • Ensure proper grounding to avoid electrical hazards.
   • Use appropriate protective equipment when handling high voltages.

6. Compliance:

   • Verify that the device meets all relevant safety and compliance standards for your application.

7. Storage:

   • Store the device in a cool, dry place to prevent degradation of performance.

8. Troubleshooting:

   • If the device fails to meet the specified parameters, check for proper installation, environmental conditions, and any potential damage.