Instructions:

1. Mounting:

   • Ensure the component is mounted on a heatsink to maintain optimal operating temperature.
   • Use appropriate mounting hardware, such as screws and thermal paste, to ensure good thermal contact.

2. Soldering:

   • Preheat the PCB to avoid thermal shock.
   • Soldering temperature should not exceed 300°C.
   • Soldering time should be kept under 10 seconds per joint.

3. Handling:

   • Handle with care to avoid mechanical stress.
   • Avoid touching the leads and body directly to prevent contamination.

4. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready for use.

5. Testing:

   • Use a multimeter to verify resistance before installation.
   • Ensure the component is not short-circuited or damaged.

6. Safety:

   • Always follow proper electrical safety guidelines.
   • Disconnect power before handling or testing the component.