Instructions:

1. Handling:

   • Handle with care to avoid damage to the leads and body.
   • Use appropriate ESD (Electrostatic Discharge) precautions to prevent damage.

2. Soldering:

   • Preheat the PCB to 100°C to 120°C before soldering.
   • Use a soldering iron with a temperature setting between 260°C to 300°C.
   • Apply solder to the pads and leads for no more than 3 seconds per joint.
   • Allow the component to cool naturally after soldering.

3. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready for use to protect against moisture.

4. Inspection:

   • Visually inspect the component and solder joints for any defects or damage.
   • Ensure that the leads are properly aligned and securely soldered to the PCB.

5. Testing:

   • Test the assembled PCB using a multimeter or appropriate testing equipment to verify functionality.
   • Check for proper voltage levels and current flow according to the circuit design.