Instructions for Use:

1. Mounting and Handling:

   • Ensure the device is mounted on a heatsink to maintain junction temperature within the specified range.
   • Handle the device with care to avoid mechanical damage.

2. Circuit Design:

   • Ensure that the peak on-state current does not exceed 300A for more than 10ms to prevent thermal damage.
   • Use a gate resistor to limit the gate current and protect the device from overvoltage spikes.

3. Thermal Management:

   • The device should be thermally coupled to a heatsink to dissipate heat effectively.
   • Monitor the junction temperature to ensure it remains below 125°C during operation.

4. Gate Triggering:

   • Apply a gate trigger current of at least 50mA to ensure reliable turn-on.
   • Ensure the holding current is maintained above 40mA to keep the device in the on-state.

5. Voltage Ratings:

   • Do not exceed the maximum off-state voltage of 800V to avoid breakdown.
   • Ensure the repetitive peak off-state voltage does not exceed 800V to prevent damage.

6. Storage:

   • Store the device in a dry, cool place within the temperature range of -55°C to 150°C.

7. Safety Precautions:

   • Follow all safety guidelines and standards when handling and operating high-voltage components.
   • Use appropriate protective equipment and follow proper grounding procedures.