Share:
Specifications
SKU: 11755491
| Parameter | Value/Description |
|---|---|
| Part Number | R5F562TADDFP#V3 |
| Manufacturer | Renesas Electronics Corporation |
| Package | 100-pin LQFP (Low-Profile Quad Flat Package) |
| Operating Voltage | 1.71 V to 3.63 V |
| Operating Temperature | -40°C to +85°C |
| CPU Core | ARM Cortex-M3 |
| Clock Speed | Up to 120 MHz |
| Flash Memory | 512 KB |
| RAM | 64 KB |
| Analog-to-Digital Converter (ADC) | 12-bit, 16 channels |
| Digital-to-Analog Converter (DAC) | 12-bit, 2 channels |
| Timers | 16-bit timers: 6, 32-bit timers: 2 |
| Serial Interfaces | UART: 6, I2C: 2, SPI: 2 |
| Watchdog Timer | Yes |
| Brown-Out Detector | Yes |
| Power Management | Low-power modes: Sleep, Deep Sleep, Stop |
| Capacitive Touch | Supported |
| Pin Count | 100 |
| Supply Current | 15 mA (typical at 120 MHz, 3.3 V) |
| GPIO Pins | 72 |
| Package Size | 14 mm x 14 mm x 1.4 mm |
Instructions for Use:
Power Supply:
- Ensure the supply voltage is within the specified range (1.71 V to 3.63 V).
- Use decoupling capacitors (typically 100 nF and 10 μF) close to the power pins to reduce noise.
Clock Configuration:
- The internal high-speed oscillator can be used for system clocking, or an external crystal can be connected for higher precision.
- Configure the system clock using the appropriate registers in the microcontroller.
Reset Circuit:
- A reset circuit should be implemented to ensure reliable operation. The reset pin should be pulled high with a resistor and can be used to trigger a reset if needed.
Programming and Debugging:
- Use a compatible debugger and programmer (e.g., Renesas E2 Studio) to program the flash memory and debug the application.
- Ensure the programming interface (SWD or JTAG) is correctly configured and accessible.
Peripheral Configuration:
- Configure the ADC, DAC, timers, and serial interfaces using the provided peripheral libraries or by directly manipulating the registers.
- Refer to the datasheet and user manual for detailed register descriptions and configuration examples.
Power Management:
- Utilize low-power modes to extend battery life in portable applications.
- Transition between active and low-power modes using the sleep, deep sleep, and stop modes.
Capacitive Touch:
- If using capacitive touch, configure the touch channels and debounce settings to ensure accurate and responsive touch detection.
- Implement software filters to reduce false triggers.
Environmental Considerations:
- Ensure the operating temperature is within the specified range (-40°C to +85°C).
- Protect the device from excessive humidity and mechanical stress.
Safety and Compliance:
- Follow all safety guidelines and ensure compliance with relevant standards and regulations.
- Use appropriate protective measures when handling the device to avoid damage from electrostatic discharge (ESD).
For more detailed information, refer to the Renesas R5F562TADDFP#V3 datasheet and user manual.
(For reference only)Inquiry - R5F562TADDFP#V3
