Share:
Specifications
SKU: 11757535
| Parameter | Description | Value |
|---|---|---|
| Device Type | Type of device | Complex Programmable Logic Device (CPLD) |
| Part Number | Specific part number | ISPLSI1024-60LJI |
| Package Type | Package style | 84-pin PQFP (Plastic Quad Flat Pack) |
| Operating Voltage (Vcc) | Supply voltage range | 3.3V ± 0.3V |
| I/O Voltage (VccIO) | Input/Output voltage range | 3.3V ± 0.3V |
| Number of I/Os | Total number of input/output pins | 84 |
| Number of Logic Cells | Number of logic cells | 1024 |
| Maximum Frequency (fMAX) | Maximum operating frequency | 60 MHz |
| Configuration Memory | Type of configuration memory | Non-volatile flash memory |
| Configuration Time | Time to configure the device | < 5 ms |
| Temperature Range | Operating temperature range | -40°C to +85°C |
| Power Consumption | Typical power consumption | 100 mW (typical) |
| Programming Method | Method of programming the device | In-System Programming (ISP) via JTAG or SPI |
| Standby Current | Current consumption in standby mode | < 1 μA |
| ESD Protection | Electrostatic discharge protection | ±2 kV HBM (Human Body Model) |
| RoHS Compliance | Compliance with RoHS standards | Yes |
Instructions for Use:
Power Supply Connection:
- Connect Vcc (3.3V) to the appropriate power supply pin.
- Ensure VccIO is also connected to 3.3V if using external I/Os.
Configuration:
- Use an ISP programmer to program the device via JTAG or SPI.
- Ensure the configuration file is correctly formatted for the ISPLSI1024-60LJI.
Signal Levels:
- All I/O signals should be within the 3.3V range.
- Ensure proper pull-up or pull-down resistors are used for floating inputs.
Thermal Management:
- Place the device on a PCB with adequate thermal vias and copper planes to dissipate heat.
- Avoid placing high-power components close to the CPLD.
ESD Handling:
- Handle the device with ESD-protected equipment.
- Store the device in ESD-protective packaging when not in use.
Testing:
- After programming, verify the functionality using a test bench or in-circuit testing.
- Check for correct configuration and I/O signal levels.
Storage:
- Store the device in a dry, cool environment to prevent moisture damage.
- Follow recommended storage conditions to ensure long-term reliability.
Inquiry - ISPLSI1024-60LJI
