Instructions for Using TS464CN:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the specified range of 4.75V to 5.25V.
   • Connect the VCC pin to a stable power source and ground (GND) to a common ground.

2. Output Current:

   • Do not exceed the maximum output current of 100mA per output to avoid damage to the device.
   • Use external current-limiting resistors if necessary to protect the outputs.

3. Quiescent Current:

   • The quiescent current (ICC) should be monitored to ensure it remains within the typical range of 5mA to 10mA under no-load conditions.

4. Output Levels:

   • Verify that the output low voltage (VOL) does not exceed 0.8V and the output high voltage (VOH) is at least 4.5V to ensure proper logic levels.

5. Input Voltage:

   • Ensure that the input voltage (VIN) is within the valid range of 0V to 5.5V to prevent damage or undefined behavior.

6. Propagation Delay:

   • Account for the propagation delay time (tpd) of 10ns to 30ns when designing timing-sensitive circuits.

7. Temperature Range:

   • Operate the device within the temperature range of -40°C to 85°C for reliable performance.
   • Store the device in an environment with temperatures between -65°C and 150°C.

8. Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow proper soldering techniques to ensure good electrical connections and prevent thermal stress.